Are you thinking about refinishing or refurbishing your hardwood flooring? If this is so, there are several things that you need to consider before you begin the entire project. On the 1 hand, refinishing a floor lets you spend less, as it is much less expensive than placing new wood flooring. But, on the flip side, you have to remember that remodeling functions require a considerable amount of time and patience. This isn’t a job that you can approach without the appropriate planning and proper attitude. But if you think all these aspects carefully during, organise the right gear and get ready to devote specific amount of energy and time, you can attain a very satisfactory final result, which will astonish both your family members and visitors. This type of floor refinishing project encompasses in general three major steps, such as:
- Staining (it depends on your choice)
As far as sanding is worried, it is possible to use one of two main types of sanders — an orbital sander and a drum sander. Orbital sanders are extremely user-friendly and demand lower risk of potential damage. Drum sanders, on the other hand, are extraordinarily powerful.
But they are quite heavy and DIYers, especially those without much past experience in this subject, can find it tough to use them the ideal way. Additionally, a drum sander needs to be continuously kept on the move, or else you’re able to develop irreversible damage in the surface of your floor, brought on from the sander turning into a static position.
Based on the features of the flooring job, it is possible to even consider hiring an edging sander. It will enable you to reach into the corners and right up to the skirting in your room.
The next thing that you need to select is the right sandpaper. Because there are lots of grit sizes you may feel confused which one best fits this undertaking. We’d advise that you to purchase an entire selection, starting from heavy grit, e.g. 40, through to nice, e.g. 120 grit.
We’d also like to discuss several tips and suggestions associated with sanding a hardwood flooring, which might come in handy when refinishing or refurbishing your flooring.
Sanding can cause a serious mess, so don’t forget to remove all of your furniture and soft furnishings get rid of everything in the given interior. When removing furniture, shield the floor and remember never to drag any heavy things throughout the ground, as this can cause significant damage.
When you have completely emptied the room, check the ground for any staples, nails or tacks. Remove staples and punch nails and screws down, so they fall under the floor surface. It’s very important to do this very carefully, as any such item can cause difficulties during sanding.
In the beginning use sandpaper together with the heaviest grit and re-do the entire floor carefully, then gradually use one with finer grit. This also applies to borders if you went to an edging sander.
If you are already done with sanding, vacuum up the dust that has accumulated on the ground and in gaps between boards.
Now, you need to leave plenty of time between sanding, staining and finishing, thus ensuring that any airborne dust has settled and has been eliminated, before getting on to the next phase.